3DXTECH THERMAX PES 1.75mm 250g (.55lbs) Natural color 3D Printer Filament 2of2

Description: Purchased as part of a large lot of 3DXTECH filament, I have for sale a total of 9 boxes of THERMAX PES 1.75mm 250g (.55lbs) Natural color spools. Sold as individual spools - price is per 250g spool. There are a number of other colors and types, I will make separate listings for each. Note: These spools have an older label listing a bed temperature of 120-160 C. The updated manufacturer recommended bed temperature for this filament is 140-160 C. Note: this listing is labeled '2of2' - I have another 5 boxes of the same product I am listing separately as they have a slightly different label and different color of the plastic spool holder (not a different color filament, the spool the filament is wrapped around is a different color). Since the product pictures would look different, the two groups are getting different listings. If you want more of this product than is shown as available in this listing, I have another 5 in different packing - check my store. Please pay attention to the temperature and diameter specifications to check if this filament is suitable for your printer. Handling time is listed as 3 days, but so long as your order is placed during business hours Sunday through Thursday I will likely have it shipped out the next day. For orders placed on Fridays or Saturdays, the item may not ship until Monday. Shipping service varies, but I will always choose an option with tracking service and will provide a tracking number promptly upon shipping. High-value orders will ship with signature confirmation service. Manufacturer specs and details: ThermaX™ PES [Polyether Sulfone] is a high-temperature amorphous polymer that offers excellent mechanical, thermal, and chemical resistance properties. ThermaX™ PES (PESU) 3D Printing FilamentPolyether Sulfone (PES or PESU) is a high-temperature aromatic sulfone polymer that exhibits exceptional thermal, mechanical, and chemical resistance properties. PES is part of the PAES (Poly Aryl Ether Sulfone) family of polymers, which includes PSU, PES, and PPSU. ThermaX™ PES is an amorphous polymer and has excellent dimensional stability and creep resistance.PES has higher temperature resistance and toughness than Ultem™ 1010, offering the ability to print parts with higher mechanical properties at elevated temperature.Print RecommendationsExtruder Temp340-390°CBed Temp140-160°CHeated ChamberRecommendedNozzle SpecsNo special concernsBed AdhesionNano Polymer AdhesiveLayer HeightNo special concernsDrying Specs120°C for 4 hoursSupportsWorks best with HTS break-away supportBenefits of ThermaX™ PES (PESU):Very high thermal properties superior to Ultem™ 1010Glass Transition Temp of 228°CHigh Environmental Stress Crack Resistance (ESCR)Sterilization capable, including EtO gas, radiation, steam autoclaving, plasma, dry heat and cold sterilizationExceptional strength and modulus, even at elevated temperaturesResists most common automotive fluids including gasoline, antifreeze, transmission fluids, motor oils, power steering fluid, windshield washer fluid (ESCR, 24 hrs, 100°C)Inherently flame retardant with low smoke evolution and low smoke toxicityExcellent dimensional stability with low creep sensitivity, low and uniform coefficient of thermal expansion, and highly reproducible part-to-part dimensions.Filament Specifications:1.75mm +/- 0.05mm in diameter1.37g/cm3 densityRecommended Print Settings:Extruder: 340-390°CBed Temp: 140-160°CBed Prep: Nano Polymer Adhesive and 3DXTECH Polyimide Tape work best for us.Heated Chamber: RecommendedSupports: ThermaX™ HTS High-Temp Support is designed specifically to work with high-temp materials like this one.Other: No cooling fan and print speeds of 16 mm/s as a starting point.Drying Instructions: 120°C for 4 hours.

Price: 45 USD

Location: Caledonia, Michigan

End Time: 2024-02-15T04:14:38.000Z

Shipping Cost: 8.95 USD