Custom SITH SABER-STAFF w/ UV PURPLE LED CROSS-GUARD Lightsaber

Description: Custom UV LED CrossGuard Lightsaber SaberStaff w/ Purple Switch, Leather Grip, and sound Lightsaber Details: •UV LEDs gives a purple glow •Made with a durable SaberForge Hilt •28mm Bass Speaker in the Pommel •18650 Li-ion 2600mah Battery •Kill Key •Sabercore 2.5 Sound board (Details below) •Leather Grip for comfortability •Purple LED backlit momentary switch •Made of Aerospace grade aluminum and like metals •All over Black Anodized •23.25”Length X 9” Width (SaberStaff) •Includes 3.7V Smart Charger *This Item comes with NO Blades* **FREE SHIPPING **TAKING REASONABLE OFFERS *This Saber has an exposed speaker for the sound 3” deep in the pommel and is NOT meant to hold a bottom blade -SABERCORE V2.5- With a push of a button this saber features Two permanent interchangeable sound fonts To change up and alter how you play! •Font 1- VIRIDIAN (Lightside) •Font 2- CRIMSON (Darkside) -SABERCORE MENU SELECT- •First Locate and pull the “Kill-key” to Engage the battery and load the last Saved font (Switch should light up) •1 push Activates the blade •Holding the button down while blade is activated retracts the blade •To change sound fonts hold the Button down for 1 beep and release then Hold button to save the profile as primary. •To Enter the Menu: Hold button down while blade is inactive for 2 beeps to boot the Menu •While in the Menu, select your settings by navigating the questions using a button press to cycle and a 1 second hold for selection. •After all settings have been saved the next boot up of the saber will be on this font with the previous saved settings. If the menu is accessed again you will have to reselect the settings and resave •Lightside font has Blast Deflect sounds effect with a button push when blade is activated •Darkside font has Blade Lockup sound effect when blade is activated with a button press to turn off and a second press to deactivate -DISCLAIMER- •All hilts are previously purchased as EMPTY from third party and major distributors and are Customized, Altered and Modified and then Sealed after Installation (unless stated otherwise) to the listed Item specifications in the Listing Details •Threads are locked in place to ensure durability for dueling and longtime use •For personal safety and a risk of damage to the electronics; DO NOT try to access the sound board Or twist or remove any threaded areas including: Emitters, Switch sections, or pommels *The Pommel on this model houses the sound Speaker and is NOT meant to hold a bottom blade or inserts and is for hilt aesthetics only! *This Saber does not come with Blades **FREE SHIPPING **TAKING REASONABLE OFFERS

Price: 535 USD

Location: Crystal Lake, Illinois

End Time: 2024-03-04T18:11:29.000Z

Shipping Cost: N/A USD