Dental Porcelain Acid Etch Gel Self Etch Enamel Resin Adhesive Bonding

Description: Description: Porcelain Etch Gel 9.5%Hydrofluoric Acid Etchant Description: 9.5% Porcelain Etch is an Etchant to make porcelain surface treatment.It is used on ceramic based crown,veneer,inlay and onlay.It can roughen the surface of porcelain and enhance the bonding strength. Packages: 2.5 ml/syringe 3X Disposable Tips Instruction Warning: Protective measures must be taken by patient,operator and assistant. Don’t use this product until you have thoroughly read and understood the instruction. DX.BOND VII Self Etch Light Cure Adhesive Bonding Description: Dentex Self-Etching light cure adhesive is 7th generation (one-step) universal adhesive.It contains MDP monomer that can provide excellent bonding strength and long durability. Indication for use: 1. Ideal for all classes of direct restoration. 2. Other indirect restoration bonding. Advantages: 1. DX.BOND VII contains MDP monomer which creates chemical interlock with enamel and dentin.It can also generate very good water-proof seal.Therefore the bonding strength is very high and long lasting. 2. There is no need to etch dentin before applying adhesive.It is really time saving and easy to use. 3. For enamel bonding,DX.BOND VII is optional for selective etch technology when high bonding strength is required.A separate enamel etching can be applied to get better enamel bonding result. Package:5ml/Bottle EXP: 2021 Acid Etching Gel 37% Phosphoric Dentex etching gel is a polymer thickened gel for use on enamel and dentin. This gel will effectively treat enamel and dentin, producing the necessary microretentive surface for successful bonding. The polymer thickener creates thixotropic properties, enhancing handling characteristics. The etchant rinse away cleanly and quickly, leaving no residue. Packages: Refill: 5 ml/syringe, Instruction X1 Indications: Treat dentin and enamel, Treating agent on dental restorative material. 1. Isolate tooth and then prepare the cavity in a conservative manner. clean the entire surface with a slurry of pumice and water. 2. Apply etchant using a tip, a disposable syringe tip, or disposable brush tip. allow etchant to remain in palce for 15 seconds. etching time should be monitored with a stopwatch. begin timing at the end of application. Option: place etchant enamel first, then proceed to cover dentin, for a slightly longer enamel etching time. 3. Rinse thoroughly (at least 5 seconds) to completely remover all traces of etchant. 4. Remove exces moisture from the tooth and proceed with the application of etching gel, waiting for 10 seconds, then rise thoroughly. then apply adhesive Normal 0 7.8 磅 0 2 false false false EN-US ZH-CN X-NONE FDA for Resin: 510(K)Number: K180463, Regulation Number: 872.3690, Product Code: EBFThis product expires on 05/2025 or better.

Price: 7.82 USD

Location: Fullerton, California

End Time: 2024-07-19T23:05:45.000Z

Shipping Cost: 0 USD