Item # 762-R HOBBIEST MIX OF POTENTIOMETERS, MANY DIFFERENT VALUES, ALL TESTED

Description: ITEM #762-R A note to all of my favored friends and customers. It has come to my attention that someone has attempted to steal my user name and they may be trying to fool you into buying from them while you think that you are buying from me. The way to tell the difference is that on my ebay user name I have and will continue to have no spaces in my name. It is one word and always has been " vintageelectronicpartsguy ". I hope this will clear up any questions regarding this matter that you may have. As always you can reach me through ebay messaging. I hope you all will have a great spring and summer.Doug Fisk <>< :-)HOBBIESTBOX OF POTENTIOMETERSStandard 3/4 turn, 10 turn, screw slot, flattened side for a knob with a set screw, round for a press on knob, short shaft, long shaft, large body, small body, and much more. These have been hand-picked to provide you with a good selection of what potentiometers you may need, without having to pay big dollars for small selections.ALSO,many, many individual pots (very small potentiometers) in assorted shapes and values. Below is all of the information I have on these. _________________________________________________________________ Standard 7/8" dia.,1/4"shaft flat side, panel mount, 3/4 turn, 1/2" shaft length, 2.44K [1 ea.] (Old Stock)Standard 7/8" dia.,1/4"shaft flat side, panel mount, 3/4 turn, 1/4" shaft length, .943M [1 ea.] (Old Stock)Standard 7/8" dia.,1/4"shaft flat side, panel mount, 3/4 turn, 1/4" shaft length, 1.05M [1 ea.] (used)Standard 7/8" dia.,1/4"shaft round, panel mount, 3/4 turn, 3/8" shaft length, 622Ω [1 ea.] (used)Standard 7/8" dia.,1/4"shaft round, panel mount, 3/4 turn, 5/16" shaft length, 5.8K [1 ea.] (used)Standard 7/8" dia.,1/4"shaft slotted, panel mount, 3/4 turn, 1/16" shaft length, 12.20K [1 ea.] (used)Standard 1 1/16" dia.,1/4"shaft slotted, panel mount, 3/4 turn, 1/8" shaft length, 111.7K [1 ea.] (used)Standard 1 1/16" dia.,1/4"shaft slotted, panel mount, 3/4 turn, 1/8" shaft length, 29.72K [1 ea.] (used)Standard 1 1/16" dia.,1/4"shaft slotted, panel mount, 3/4 turn, 5/16"shaft length, 210.9K [1 ea.] (Old Stk.)Standard 1 1/16" dia.,1/4"shaft slotted, panel mount, 3/4 turn, 1/16" shaft length, 59.6K [1 ea.] (Old Stk.)Standard 1 1/16" dia.,1/4"shaft slotted, panel mount, 3/4 turn, 1/32" shaft length, 10.05K [1 ea.](Old Stk.)Standard 11/16" dia.,1/8"shaft slotted, panel mount, 3/4 turn, 1/8" shaft length, 96.4K [1 ea.] (used) Non-Std. 11/16" dia.,1/4" "X" slotted shaft, tang mount, 3/4 turn, 1/16 shaft length,10.56K [1 ea.] (used)Non-Std. 11/16" dia.,1/4" slotted & knurled shaft, panel mount, 3/4 turn, 3/8" shaft length, dual layer, B2K [1 ea.] (Old Stock.)Non-Std. 5/8 dia.,1/4" slotted & knurled shaft, panel mount, 3/4 turn, 1 1/16" shaft length, 9.07K [1 ea.] (used) Type "W" 1/2" dia., 1/8" slotted shaft, panel mount, 3/4 turn, 5/8" shaft length, 500.7Ω, [1ea.] (used)Type "W" 1/2" dia., 1/8" slotted shaft, panel mount, 3/4 turn, 5/8" shaft length, 546.7Ω, [1ea.] (used) Type "W" 1/2" dia., 1/8" slotted shaft, panel mount, 3/4 turn, 5/8" shaft length, 515.4Ω, [1ea.] (used)Type "W" 1/2" dia., 1/8" slotted shaft, panel mount, 3/4 turn, 5/8" shaft length, 523.7Ω, [1ea.] (Old Stock)Type "G" 1/2" dia., 1/8" flat shaft, panel mount, 3/4 turn, 3/8" shaft length, 29.5K, [1ea.] (Old Stock) Standard 1" dia.,1/4" plastic slotted shaft, panel mount,3/4 turn,1 3/4" shaft length, 10.26K, [1 ea.] (used)Square 5/8"x5/8"x1/2" , 1/8" slotted shaft, panel mount, 3/4 turn, flush shaft length, 51.07K,[1 ea.] (used)Round 13/16" dia., 1/4" slotted shaft, panel mount, 10 turn, 3/8" shaft length, 4.96K, [1 ea.] (used)Triple layer 1" dia., 3/16 & 1/4" double shaft, panel mount, 13/16" comb. shaft length, 20.05K (upper toward shaft) & 9.69K (in the middle) and no reading across the two contacts on the bottom. I am not sure how to measure them. [1 ea.], (Old Stock) Now the pots.Photo #3 is of CERMET TRIMMER POTS. These adjust with a screw on one end. Values are 100Ω, 2KΩ, 5KΩ, 25KΩ, 50KΩ and 1MEGΩ. There is one of each.Photo #4 is of a different type of pot that is adjusted with a micro flat screwdriver on one edge or a mini flat screwdriver on a flat side. The values are 2.0KΩ, 4.67KΩ, 4.97KΩ, 9.44KΩ, 10.3KΩ, 10.32KΩ, 10.59KΩ, 11.03KΩ, 46.64KΩ and 101.7KΩ. There is one each. The numbers are actual readings when tested.Photo #5 is of 25ea. 5KΩ side adjustable pots that have not been tested by me. I believe they are all "take outs" from working equipment.Photo #6 is of #503 trim pots. These are very small and adjust on the top. All but one is labeled 50KΩ. These are the actual readings when I tested them. 47.05KΩ, 1.57MΩ (not 50K), 47.45KΩ, 41.36KΩ, & 45.14KΩ. One each.Photo #7 is of trim pots that are round with a flat screwdriver slot on top and 3 legs underneath. This is a mixture of old and new. Values are 1KΩ (1 ea.), 2KΩ (1 ea.), 10KΩ (1 ea.), 20KΩ (3 ea.), 47KΩ (1 ea.), 100KΩ (1 ea.) and 2MΩ (1 ea.). These are not tested values.Photo #8 is a mixture of 16 various pots (one of each value-type as listed). Check the photo carefully if they are important to you. I will give you values but the rest is up to you this time.1KΩ @ .860KΩ actual, 10K @ 9.60KΩ actual, 5.39KΩ actual, 45.8KΩ actual, 100Ω actual, 87.3Ω actual, 88.8KΩ actual, 97.0KΩ actual, 100.7KΩ actual, 78.2KΩ actual, 102.6KΩ actual, 1.97MΩ actual, .597KΩ actual, 1.01KΩ actual, 1.02KΩ actual, 1.00kΩ actual.That is all there is. There should be about 92 potentiometers all together, but I am going to throw a handful of various pots into the mix to make sure you get more than 100 potentiometers for the low "buy it" now price. Please read all that is below, it could end up being very important to you. TESTING: When I test them, I first turn the shaft to see how many turns there are from one side to the other. Then I take my multimeter, set to "auto" for continuity. I put one lead on the center tang and the other lead on either side tang. Then I turn the shaft all the way and watch for the final read out. That read out is the number I give you as the actual value. It will almost always be somewhat different than the stated value. If it has a different readout than I started with I assume it works correctly. Then I do the same for the other side. This is the way I test them. If that doesn't agree with you then please stop before you buy. I won't be taking any back because you don't think it works. Policy:Item # 1. All sales are considered final within 24 hours of when the shipping company declares the item delivered or our representative declares it finished. Items for Sale:Descriptions and photos are made for your information. We try to be as accurate as possible and in most cases, we have no other information available. However, if you do have a question, please message us through the listing for fastest action. Shipping:We ship economically primarily through the USPS (Post Office). We will combine auction items for shipping to reduce shipping charges if we are aware that you have multiple purchases prior to package final preparation. To have the best chance of reducing charges, be sure to message us prior to or at the time of checkout. Special handling requires additional work and will be charged to you. We will always do the best we can, but if we cannot accommodate you, all items will fall under normal terms as stated in the listing. Sales:All sales are considered final at the time checkout happens. We do not sell anything that would carry a useable factory warranty or guarantee. Therefore, we do not offer returns or refunds. Any exceptions must have proper written authority. What we do offer is our word that we will take care of any problem that is handled fairly on your side and within our power to accomplish. However, we are not in business to give things away nor do we wish to work for nothing. If you have a legitimate problem, by all means contact us through the listing and we will do our best to help you solve it fairly. If we cannot agree on a solution, we will always fall back on item #1 under policy.Note: Changing one's mind is not a reason for exceptions, period. Feedback:We enjoy a 100% positive feedback rating because we earn it. We hope you feel the same. Therefore, we will post positive feedback at the time we ship your order. We request that when you receive your order (Our transaction is considered complete 24 hours after we are notified that your order has been delivered) that you check it over carefully to be sure that it is precisely what we described and showed in the photos. As soon as you have determined that everything is ok, please stop and post positive feedback. Even the best of us can forget to post feedback but beware, feedback can work both ways. If you short us on feedback you can expect to see the results in your feedback rating. The Finish:We are a Christian family outfit, and we strive to uphold the highest standards in all that we do. If you have an issue with us, please allow us to prove it.Thank You Doug Fisk ><> :) dba: vintageelectronicpartsguy here on Ebay

Price: 20 USD

Location: Rimrock, Arizona

End Time: 2023-10-22T23:57:53.000Z

Shipping Cost: 10.2 USD