OPT7 Aura LED Interior Light Kit 4pc/6pc 12-Inch Smart Strips with Dimmer Strobe

Description: AURA 4PC Single/Double and 6PC Single Original Kit Included: 1 x 21-Key Handheld Remote 1 x Cigarette Power Adapter 1 x AURA V2 Control Box (O) + 4-Pin Round RGB Pre-Attached Connectors 4 x 12" LED Single/Double Strips with Adhesive Back OR 6 x 12" LED Single Strips with Adhesive Back 2 x 5ft + 2 x 10ft Light Strip Extension Wire (4PC) OR 2 x 5ft + 4 x 10ft Light Strip Extension Wire (6PC) 1 x Pack of Mounting Kit and Zip Ties AURA 6PC Double Original Kit Included: 1 x Handheld Remote 1 x Cigarette Power Adapter 1 x AURA Control Box 6 x 12" LED Double Strips with Adhesive Back 2 x 5ft + 4 x 10ft Light Strip Extension Wire 1 x Pack of Mounting Kit and Zip Ties Waterproof Connectors are here to stay! (Only for 4PC Single/Double Row and 6PC Single Row Items) Get OPT7s AURA Interior game-changing lighting system that installs in minutes and lasts for years to come! IMPORTANT (Only for 6PC Double Row Item): The LED connectors are not waterproof. You will need to use heat shrink tube or leelctrical tape around the LED connectors to ensure the longevity of the lighting kit. Automotive Adhesive Tape Our premium strip kits use strong binding tape for a lasting hold you can trust. Tip on applying adhesive LED strips securely: 1. To prep the area you wish to mount the LED Strip. Wash the installation point with warm water, then wipe it dry. 2. Dampen a clean cloth in warm water, then scrub the surface to remove debris. Any grime left behind could prevent the LEDs from sticking, so thoroughly clean the surface until it’s free of dirt and scuff marks. 3. Remove any moisture left over with a clean, dry cloth or give the surface 30 minutes to air dry. Next, use the adhesive booster that we provide to wipe the area for a ready to stick surface. 4. Peel the adhesive backing off and press the LEDs in place. LED lights are like stickers, so wait until you’re ready to put them on the wall before pulling the backing off. It’s best to do this a little at a time. Start at one end of the surface, peeling the backing off of the initial LED light. Position it, press it flat by hand, then continue placing the rest of the strip. Take your time. Make sure the LEDs are in the right place so you don’t have to move them later. 5. Align the arrows on the pins to ensure secure connections during installation. This step is crucial as it prevents improper installation, which has been causing color issues for some users. Unfortunately, your browser does not support videos.

Price: 37.49 USD

Location: Fremont, California

End Time: 2024-08-25T23:25:26.000Z

Shipping Cost: 0 USD