Replacement damper 2 wire spring motor actuator HONEYWELL ARD ZD M847D RZ3-1

Description: Replacement damper 2 wire spring motor actuator HONEYWELL ARD ZD M847D RZ3-1SPECIFICATIONS: Voltage: 24 VAC +/- 10%, 60 Hz, 0.36A Torque Rating: Power open 32 in. oz./spring close 32 in. oz. - torque is consistently delivered throughout the full 90º rotational operating range to open and close the damper, irrespective of whether the actuator is operating in Power Advance Mode (energized) or Spring Return Mode (de-energized). Speed Stroke: Motor driven 30 sec./spring return 6 sec. Rotating Angle: 93.5º Extremely reliable. Statistical life reliability exceeds 120,000 cycles at 90% reliability and 100% confidence with no decay in delivery torque over life of the actuator. Noise Level: Very quiet operation, typically ≦ 40dB at 3’ Our all metal gears and precision engineering get rid of the failure prone thin metal or plastic OEM gears from Honeywell. Our gears are twice as wide as the new “improved” Honeywell plastic-covered motors. See the gear comparison in the product photos. We have also included photos of the motors that ours replace. Fitment: These motors are replacements for the Hansen 135-6 motor, as well as other brands with the same footprint - 1.33 or 1 5/16” center shaft to shaft spacing. Jackson HD series; Jackson D XX series; Zonefirst ZDS; EWC URD; Robert Shaw DAR; Trol a temp RDMZ, RDMH, and MARD; Hansen; and many others. Feature: REPLACEMENT M847D DAMPER ACTUATOR MOTOR - 24Vac spring return damper actuator is designed to operate directly driven zone dampers, used to contol air fow in ducts. The synchronous motor acuator can be driven open (or chosed) using any 24 wolt rated two position switch - eg.a wall swith or a thermostat subbase switch. The M847D replaces the RDMH andR DMZ damper actuators for use on TrolA-Temp@ ARD and ZD dampers.APPLICATIONS - TOVEN-RV 2-wire spring return damper actuator motor is compatible with Honeywell's M847D, M847D1004, and old ARD and ZD series of damper motors. DuroZone #35105 damper Motor & similar HVAC spring-return 2-wire damper actuators by Zone First, Erie, and others. Does not work with Honeywell ZD Rectangular Dampers. Please check the fitments before ordering!EASY INSTALLATION - Direct coupling to 5/16" damper shaft. Can be used in either Normally Open (N.O.) HVAC air ducts, or Normally Closed (N.C.) venting installations. 2-Wire spring return actuator 24V is an ideal replacement for the Honey Well model! Installation is pretty straight forward. Mounting Means: direct connection to damper shaft; Mounting Position: Multi-poise.SPECIFICATIONS - Electrical Rating: 24 Vac 60 Hz 0.32 Amp., 8 VA; Electrical Connection: 1/2' conduit; Nominal Angular Rotation: 90* (max. 105% ); Torque: Min. 423 mNm (milli newton meter) (60 in.oz) output torque available when motor is energized and device is at the spring returned initial sta rt position.; Energized at rated load - 30 seconds; De-energized (spring return) - 10 seconds; Direction of Shaft Rotation: clockwise, when energized and viewed from the base or shaft end.BUY WITH CONFIDENCE - Damper motor actuator comes with 1-Year Warranty. M847D1004 heavy-duty damper actuator motor is made of stainless steel housing and metal gears, durable and rust-resistant. Undergo strict quality tested for over 150K cycles of flawless operations. Fixed 90-degree operation angle (stroke). If you have any questions about our products or service, please feel free to contact us for replacement or refund. We will be gald to help!SPECIAL TIPS - The hole of the product is ∅8.1-8.2, there is a locking screw next to the lower shaft, which needs to be loosened during installation. It is suggested to use the old Honeywell long set screw because it will make it easier to tighten the set screw.

Price: 55.5 USD

Location: Houston, Texas

End Time: 2024-12-01T18:56:22.000Z

Shipping Cost: 0 USD