Sediment Water Filter Cartridge 5 Micron 10"x 2.5", Four Layers of Filtration,

Description: Sediment Water Filter Cartridge by Ronaqua 10"x 2.5", Four Layers of Filtration, Removes Sand, Dirt, Silt, Rust, made from Polypropylene 5 Micron Product Description �� Industry Standard 10-inc 5 Micron Sediment Filter - Used for effectively removing most sediments, cysts, chlorine, and fluorides 💎This is a filter for a standard Reverse Osmosis Water Filtration Unit or any type of Water Filtration Unit with a 10 inch housing and WELL-MATCHED Models of Cartridges: Dupont PFC5002,DuPont WFPFC5002, 3M CFS110, AP110-NP, AP101S, AP101T, Aqua Pure AP110, AP11T, AP51T, Hydronix SGC-25-1005, Culligan P5, P5-D, P5A, OmniFilter RS14, RS14-SD, RS14-DS and RS14-SS, GE FXUSC, Aquaboon 25S-5M, Manitowoc K-00173, Whirlpool WHKF-GD05, American Plumber W5P, Pureplus PP10-05 💎Product Lifetime: Replace two or three times a year - depending on your water quality 💎This filter is wrapped and sealed and meets NSF (National Science Foundation) Standards and Regulations. Dimensions: 10 inches x 2.5 inches (24.4 cm x 6.35 cm) 💎WELL-FIT FOLLOWING HOUSINGS AND REVERS OSMOSIS WATER FILTER SYSTEMS: DuPont WFPF38001C, WFPF13003B, Culligan WTR Filter HF-360A and HF-150A, American Plumber WC34-PR, Geekpure RO5-FH10, Hydronix HF3-10CLBK34, EcoPure EPW2; iSpring RCC7AK, Global Water RO-505, RO5DX, APEC ROES-50-A, SimPure RPWROKSN075HDB Melt-blown Four Layers Filtration Polypropylene Sediment Filter This sediment filter is often the first filter installed in the Reverse Osmosis circuit and acts as a net as it catches unwanted particles, including sand, dirt, silt, rust, and other fine particles. Sediment filters are made of fine melted polypropylene, which is then blown and spun into a cylinder-like form. Propylene is a substance that is resistant to chemical solvents, bases, and acids. Removal of these particles allows filters, such as Carbon Block or GAC (Granular Activated Carbon) filters, to perform better and for longer periods of time. These particles and pollutants come from water sources, old and dirty pipes, as well as contaminants that are used to treat the water. Specifications Industry Standard 10 inch 5 Micron Sediment Filter - Used for effectively removing most sediments, cysts, chlorine, fluorides This is a filter for a standard Reverse Osmosis Water Filtration Unit or any type of Water Filtration Unit with a 10 inch housing Product Lifetime: Replace two or three times a year - depending on your water quality This filter is wrapped and sealed and meets NSF (National Science Foundation) Standards and Regulations Dimensions: 10 inches x 2.5 inches (24.4 cm x 6.35 cm) (Industry standard size for most in-house water filters) Micron Rating: 5 Micron - this is the smallest opening and prevents most bacteria and particulates from entering your water system. Dimensions: 10 inches x 2.5 inches - this is the industry standard size for most in-house water filters. Product Lifetime: Replace two to three times per year, depending on your water quality. What is a Sediment Filter? A Sediment Water Filter removes the physical debris and impurities from your water. The sediment filter has tiny holes through which water is able to pass, however the unwanted particles are not. As these particles come in different sizes, so do the filters. The filter sizes are measured in microns, the smaller the micron measurement, the smaller the holes in the filter, allowing to hold back the smallest of particles. Generally, for water that is more visibly polluted, containing larger particles, a sediment filter of a larger size (such as 20 or 50 microns) is recommended in the first stage of installation to prevent the clogging of the next stage(s) of filters.

Price: 6.99 USD

Location: Brooklyn, New York

End Time: 2024-08-27T22:33:26.000Z

Shipping Cost: 0 USD